The global expert in solid state switching technology

Home About Crydom Press Room DRML1 Load Monitoring Module Press Release
  • USA & Canada +1 (877) 502 5500
  • Latino America +1 (877) 502 5500
  • Austria +44 (0) 1202 416193
  • Belgium +32 (0) 2 460 4413
  • France +33 (0) 170 791 389
  • Germany +49 (0) 180 3000 506
  • Italy +39 (0) 236 026 567
  • Spain +34 902 876 217
  • Switzerland +44 (0) 1202 416193
  • The Netherlands +31 (0) 71 582 0068
  • UK +44 (0) 1202 416193
  • Other EMEA +44 (0) 1202 416193
  • China +86 (21) 2306 1686
  • South Korea +82 31 601 2088
  • India +91 80 6792 0879
  • East Asia Pacific +852 3960 6473
Go back

Load Monitoring Module Now Available for NOVA22 Solid State Relays

DRML1, Crydom’s Load Monitoring Module designed to detect partial or total load failure of up to 8 loads and 50 Amps

DRML1 Load Monitoring Module Press Release Image

Crydom introduces the DRML1 Load Monitoring Module, specially designed for NOVA22 solid-state relays which allows to monitor up to 8 heating elements, with similar current value, for a total current ranging from 1.2 Amps up to 50 Amps.

The DRML1 module measures the current value and compares it against a pre-set value (Teach value), which is stored during installation. Normal operation is monitored and failures are detected. An alarm is activated when the module detects undercurrents in the heating circuit below -12.5% of the nominal current. The module allows also for other alarm conditions to be detected such as: overcurrent condition (when the current exceeds the maximum of +12.5% of the nominal current), blown fuses (open load), damaged (short circuited SCR) and interrupted SSR, as well as those in half-wave operation. The nominal current value (Teach value) is set by the operator either with the "Teach-In" push button, placed on the front, or with the external "Teach-In" input.

The new DRML1 Load Monitoring Module offers three unique features in the market. It allows the user to select the maximum current value of 20 Amps or 50 Amps, operates with a minimum partial load detectable value of 150 mA and includes an adjustable alarm response delay (0.1 sec, 1 sec or 5 sec), selectable via a parameter selector switch. This avoids fault messages generated by voltage drops.

Check DRML1 specifications

DRML1 Load Monitoring Module

Malfunctions are indicated by a multicolor LED and can be localized systematically thanks to the alarm output which allows up to 128 DRML1 modules to be connected to a collective alarm. The LED indicates when power is ON and also when the Teach-In function is activated (Blue), when the input signal is ON (Green) and when an alarm condition is activated (Red).

The DRML1 is designed for direct installation on NOVA22 Solid State Relays contactor configuration versions (both Panel Mount PM22 Series and DIN Rail Mount DR22 Series models). The plastic enclosure provides IP20 level protection.

DRML1 can be used in different applications but its key advantages make it ideal for quality supervision of plastic parts production in injection molding machines, thermoforming machines and rubber parts production.

Main features include:

  • Up to 8 loads can be monitored
  • Selectable max current rating: 20 Amps or 50 Amps
  • Selectable alarm delay (0.1 sec, 1 sec, 5 sec)
  • Minimum current for single load: 150 mA
  • Alarms detected: undercurrent, overcurrent, open mains voltage, SSR fault
  • Alarm output: PNP open collector, 6-28 VDC, 100 mA
  • Up to 128 modules can be connected in parallel
  • Operating temperature: -25°C to +70°C
  • Pluggable module for both DIN Rail and Panel Mount NOVA22 SSRs
  • Multicolor LED with input status and alarm indication

Crydom’s DRML1 Module is C-UL-US Recognized and compliant to IEC 61000-4 (EMC) and IEC 60068-2 (Shock and Vibration) requirements. It’s also CE compliant to the Low Voltage Directive as well as the RoHS Directive.

For more information on the DRML1 Module contact a Crydom Distributor, Representative or Local Crydom Sales Office, or visit our website at www.crydom.com.

About Crydom

Crydom, global expert in solid state switching technology, combines technology and innovation to provide customers a wide range of standard Solid State Relays and Solid State Contactors, and specializes in custom designed solid state switching solutions for any load control application.

Crydom is a brand of Sensata Technologies.

www.crydom.com

About Sensata Technologies

Sensata Technologies is one of the world’s leading suppliers of sensing, electrical protection, control and power management solutions with operations and business centers in 16 countries. Sensata’s products improve safety, efficiency and comfort for millions of people every day in automotive, appliance, aircraft, industrial, military, heavy vehicle, heating, air-conditioning and ventilation, data, telecommunications, recreational vehicle and marine applications. For more information please visit Sensata’s website.

www.sensata.com

For additional information, please contact:

Gabriela Miranda
+1 (619) 210 1556
marketing@crydom.com
or visit our web site
www.crydom.com